Engineering Calculators

Beam Deflection is evaluated from Load Configuration, Point Load and Distributed Load. The calculation reports Maximum Deflection, Maximum Deflection and L/δ Ratio.

Stress & Strain is evaluated from Axial Force, Cross-Section Area and Original Length. The calculation reports Normal Stress, Normal Stress and Axial Strain.

Concrete Volume is evaluated from Length, Width and Thickness / Depth. The calculation reports Volume, Volume and Volume with Overage.

Pipe Flow Rate is evaluated from Pipe Inner Diameter, Fluid Velocity and Flow Rate. The calculation reports Pipe Cross-Section Area, Flow Velocity and Flow Velocity.

Pump Power is evaluated from Flow Rate, Total Head and Pump Efficiency. The calculation reports Hydraulic Power, Shaft / Brake HP Required and Shaft Power.

Gear Ratio is evaluated from Driver Gear Teeth, Driven Gear Teeth and Input Speed. The calculation reports Gear Ratio, Output Speed and Output Torque.

Reynolds Number is evaluated from Fluid Velocity, Hydraulic Diameter and Fluid. The calculation reports Reynolds Number, Flow Regime and Darcy Friction Factor.

Radiation Dose is evaluated from Effective Dose, Effective Dose and Absorbed Dose. The calculation reports Effective Dose, Effective Dose and Effective Dose.

Heat Transfer is evaluated from Heat Transfer Mode, Mass and Specific Heat. The calculation reports Heat Transfer, Heat Transfer Rate and Power / Rate.